XEPA PSD3 Installation Guide

Please do not return this item to the store.For service or questions about your solar light, call our customer service at 800.284.8828 (8:30am - 5:30p

9Light/Camera Functions:• OFF: Neither the light nor the camera will function; the product will be completely off, but the solar panel will keep

10• Light will not work once battery is removed from the jacket. Please plug in the solar panel charger or any other approved power adaptor aft

11and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. The source of t

12• Switch to TEST mode to check that the light can illuminate even during the daytime.• Make sure battery is not drained and solar panel plug is

13• Check DVR menu to ensure camera is registered and auto paired.• Check that the DVR power supply is working. • Make sure the distance between th

14Product Warranty & Support InformationFor customer support call (800) 284-8828 between 8:30am and 5:30pm, Monday to Friday, Pacific Time or visi

1IntroductionThank you for purchasing the PSD3 Solar-Powered Security Light with the digital wireless DVR security system—the most cost-effective way

2Important Safety Information• Do not expose the light to fire or intense heat. • Do not immerse in water. • Never look directly into the light or

3What’s Inside the Package:PSD3 solar light with built-in camera and rechargeable battery Solar charging panel with 15’ cable DVR with adap

4Product Profile:1. Lamp Head2. Motion Activated Indicator 3. Motion Sensor Lens4. Built-in Camera5. Antenna6. Battery Housing7. Horizontal Adj

5Installation Recommendations:• The PSD3 light fixture should be installed on a flat and stable surface—the higher the light is placed, the larger

6Installing the LED Security Light:1. Mark holes on the wall through the Installation template. 2. Drill holes with a 3/16” drill bit. 3. Gently ta

76. Rotate/tilt the motion-detection sensor/camera towards the desired coverage area.Installing the Solar Panel:

84. Gently tap the mounting anchors into the holes until they are flush with the mounting surface. 5. Place the base of the solar panel over th